Read More
Date: 18-2-2020
990
Date: 12-2-2020
684
Date: 15-2-2020
1213
|
The technique of Q switching allows the generation of laser pulses of short duration from a few nanoseconds to a few tens of nanoseconds and high peak power from a few megawatts to a few tens of megawatts.
Suggest we put a shutter into the laser cavity. If the shutter is closed, laser action cannot occur and the population inversion can be very high. If the shutter is opened suddenly, the stored energy will be released in a short and intense light pulse. This technique is known as Q-switching. Q here denotes the ratio of the energy stored to the energy dissipated in the cavity. This technique is used in many types of solid-stat lasers and CO2 lasers to get a high-power pulsed output.
Figure 7. The bandwidth, ∆f , or f1 to f2, of a damped oscillator is shown on a graph of energy versus frequency. The Q factor of the damped oscillator, or filter, is fc/∆f. The higher the Q, the narrower and 'sharper' the peak is.
To produce high inversion required for Q-switching, four requirements must be satisfied.
|
|
"عادة ليلية" قد تكون المفتاح للوقاية من الخرف
|
|
|
|
|
ممتص الصدمات: طريقة عمله وأهميته وأبرز علامات تلفه
|
|
|
|
|
ضمن أسبوع الإرشاد النفسي.. جامعة العميد تُقيم أنشطةً ثقافية وتطويرية لطلبتها
|
|
|