A lot of laser spectroscopy is done from the ground state to an excited state. However, laser spectroscopy can also be performed between two excited states. Figure 1a shows a simplified Grotrian diagram for a transition in neutral atomic oxygen-16 (8 protons and 8 neutrons). The lower state, which we give the label J = 2, can be excited to three different excited states, which we give the labels J' = 1, J' = 2, and J' = 3. Like in the previous examples, just consider these labels for now. The Rule for these transitions are the same as before, we just replace F with J : ΔJ =−1, 0, or +1 with the exception that J = 0 /→ J' = 0. 8 . ... Oxygen, in its natural form, is a molecule composed of two oxygen atoms. A discharge (basically think about a “neon tube” filled with oxygen molecules) can be used to both dissociate the molecule into neutral atomic oxygen as well as excite the electrons into a variety of excited states. Most of the atoms are not in the J = 2 lower state, but there are enough for us to do spectroscopy. It should be noted that the J = 2 lower state also has a lifetime of about 27 ns, so the discharge needs to continually repopulate the lower state for us to do spectroscopy. Discharges are also typically hotter than room temperature.

Fig. 1 (a) A simplified energy level diagram for a spectroscopic study in atomic oxygen-16 near 926 nm. The spectrum is taken between two excited states, which I call the lower state and the upper state. (b) Experimental data of a saturated absorption spectroscopy spectrum from the J = 2 lower state of oxygen-16 to the J' = 1, J' = 2, and J' = 3 upper states. There are only five spectral features because the vapor cell wasn’t hot enough for the V crossover created by the J = 2 → J' = 1 and J = 2 → J' = 3 transitions; the Doppler profiles for these two transitions did not overlap .
Next, take a look at Fig. 1b. There is a very visible V crossover created by the large J = 2 → J' = 3 (real) transition and medium sized J = 2 → J' = 2 (real) transition. Those transitions are about 3500 MHz apart, but the Doppler profiles of these individual transitions are large enough to create a crossover. This crossover is labeled as J = 2 → J' = 3/2. 9 The V crossover with the label J = 2 → J' = 2/1 is created by the medium J = 2 → J ' = 2 and the small J = 2 → J' = 1 transitions. It is also quite visible, although not as big as the J = 2 → J ' = 3/2 V crossover. Those two transitions are about 3200 MHz apart. We did not see a V crossover created by the J = 2 → J' = 3 and J = 2 → J' = 1 transitions, which would have the label J = 2 → J ' = 3/1. Those two transitions are about 6500 MHz apart. Because they are so far apart, the individual Doppler profiles don’t overlap resulting in no crossover feature.